manualshive.com logo in svg

D-Link DWL-8600AP, Administrator'S Manual

Share
Download
D-Link DWL-8600AP Administrator'S Manual Download Page 85

Software User Manual

 D-Link UAP

12/10/09

34CSFP6XXUAP-SWUM100-D13

Upgrading the Firmware

Page  85

R

EBOOTING

 

THE

 A

CCESS

 P

OINT

For maintenance purposes or as a troubleshooting measure, you can reboot the UAP. To reboot the AP, click the 

Reboot

button on the 

Configuration

 page.

U

PGRADING

 

THE

 F

IRMWARE

As new versions of the UAP firmware become available, you can upgrade the firmware on your devices to take advantage 
of new features and enhancements. The AP uses a TFTP client for firmware upgrades. You can also use HTTP to perform 
firmware upgrades.

Use the following steps to upgrade the firmware on an access point by using TFTP:

1.

Click the 

Upgrade

 tab in the 

Maintenance

 section of the navigation tree. This page is also accessible from Tools > 

Upgrade menu on the main menu bar.

Information about the current firmware version is displayed and an option to upgrade a new firmware image is provided.

2.

Make sure the 

Use TFTP to upload the file

 check box is selected.

3.

Enter a name for the image file in the 

New Firmware Image

 field, including the path to the directory that contains the 

image to upload.

For example, to upload the 

ap_upgrade.tar image located in the /share/builds/ap directory, enter /share/builds/ap/

ap_upgrade.tar in the 

New Firmware Image

 field.

The firmware upgrade file supplied must be a 

tar file. Do not attempt to use bin files or files of other formats for the 

upgrade; these types of files will not work.

4.

Enter the IP address of the TFTP server. 

5.

Click 

Upgrade

.

Upon clicking 

Upgrade

 for the firmware upgrade, a popup confirmation window is displayed that describes the upgrade 

process.

Note: 

When you upgrade the firmware, the access point retains the existing configuration information.

Summary of Contents for DWL-8600AP








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands