Software User Manual
D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13
Configuring SNMPv3
Page 77
S e c t i o n 6 : C o n f i g u r i n g S N M P v 3
This section describes how to configure the SNMPv3 settings on the UAP and contains the following subsections:
•
Configuring SNMPv3 Views
•
Configuring SNMPv3 Groups
•
Configuring SNMPv3 Users
•
Configuring SNMPv3 Targets
The configuration pages for the features in this section are located under the
SNMPv3
heading on the navigation tree of the
UAP Web UI.
C
ONFIGURING
SNMP
V
3 V
IEWS
A MIB view is combination of a set of view subtrees or a family of view subtrees where each view subtree is a subtree within
the managed object naming tree. You can create MIB views to control the OID range that SNMPv3 users can access.
A MIB view called "all" is created by default in the system. This view contains all management objects supported by the
system.
Figure 25: SNMPv3 Views
Table 35 on page 78
describes the fields you can configure on the SNMPv3 Views page.
Note:
If you create an
excluded view subtree, create a corresponding included entry with the same view name to
allow subtrees outside of the excluded subtree to be included. For example, to create a view that excludes the
subtree 1.3.6.1.4, create an
excluded entry with the OID 1.3.6.1.4. Then, create an included entry with OID .1 with
the same view name.
