background image

34

DWL-8220AP User’s Manual 

D-Link Systems, Inc.

• Return Merchandise Ship-To Address

(USA): 17595 Mt. Herrmann, Fountain Valley, CA 92708
(Canada): 2180 Winston Park Drive, Oakville, ON, L6H 5W1
(Visit http://www.dlink.ca for detailed warranty information within Canada)

D-Link may reject or return any product that is not packaged and shipped in strict compliance 
with  the  foregoing  requirements,  or  for  which  an  RMA  number  is  not  visible  from  the 
outside of the package. The product owner agrees to pay D-Link’s reasonable handling and 
return shipping charges for any product that is not packaged and shipped in accordance 
with  the  foregoing  requirements,  or  that  is  determined  by  D-Link  not  to  be  defective  or 
non-conforming.

What Is Not Covered:

This limited warranty provided by D-Link does not cover:

Products,  if  in  D-Link’s  judgment,  have  been  subjected  to  abuse,  accident,  alteration, 
modification,  tampering,  negligence,  misuse,  faulty  installation,  lack  of  reasonable  care, 
repair or service in any way that is not contemplated in the documentation for the product, 
or if the model or serial number has been altered, tampered with, defaced or removed; Initial 
installation, installation and removal of the product for repair, and shipping costs; Operational 
adjustments  covered  in  the  operating  manual  for  the  product,  and  normal  maintenance; 
Damage  that  occurs  in  shipment,  due  to  act  of  God,  failures  due  to  power  surge,  and 
cosmetic damage; Any hardware, software, firmware or other products or services provided 
by anyone other than D-Link; Products that have been purchased from inventory clearance 
or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly 
disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-
Link or an Authorized D-Link Service Office will void this Warranty.

Disclaimer of Other Warranties:

EXCEPT  FOR  THE  LIMITED  WARRANTY  SPECIFIED  HEREIN,  THE  PRODUCT 
IS  PROVIDED  “AS-IS”  WITHOUT  ANY  WARRANTY  OF  ANY  KIND  WHATSOEVER 
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY 
CANNOT  BE  DISCLAIMED  IN  ANY TERRITORY  WHERE  A  PRODUCT  IS  SOLD, THE 
DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. 
EXCEPT  AS  EXPRESSLY  COVERED  UNDER  THE  LIMITED  WARRANTY  PROVIDED 
HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE 
OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.

Limitation of Liability:

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY 
CONTRACT,  NEGLIGENCE,  STRICT  LIABILITY  OR  OTHER  LEGAL  OR  EQUITABLE 
THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES 
OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 
(INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF 
REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, 

Warranty (continued)

Warranty

Summary of Contents for DWL-8220AP - AirPremier Wireless Switch Dualband Access...






































Reviews: