D-Link DWL-500 Page 42 User Manual Download

Page: 42 / 80

NETWORKING BASICS

You may have had some ideas about how to use your new

network prior to installing this kit - sharing files, printing from a

computer on the network, or accessing the Internet on multiple

computers with one connection. This section will help you get

started on those ideas or even give you some new ones.

However, this section is not intended to be a comprehensive

guide to networking, it is just an outline of a few networking

basics.

If you are interested in learning more about networking, we

have identified some Internet resources that may be of interest:

D-Link Systems, Inc.

http://www.dlink.com

D-Link is one of the largest manufacturers of Ethernet products

in the world. D-Link’s technological expertise and dedication

to providing quality products at a low price makes D-Link a

good place to watch for the newest in networking innovations.

Or, you may want to get the newest drivers available for your

Network Adapters.

Summary of Contents for DWL-500

















































































Search results

Summary of Contents for DWL-500

Reviews:

Related manuals for DWL-500

Brands by name

Popular brands

D-Link DWL-500, User Manual

Search results

Summary of Contents for DWL-500

Reviews:

Related manuals for DWL-500

Brands by name

Popular brands