CONFIGURATION UTILITY
PS Mode
PS (Pseudo Set) mode is by default set to "Disabled". When the
mode is set to AdHoc or "802.11b AdHoc", then the PS mode will
need to be changed to "Enable."
Channel
There is not an option to change the channel setting when the
"Infrastructure" mode is selected. However, the option for channel
selection is available in AdHoc or "802.11b AdHoc" mode.
Encryption tab
Figure 4 - Configuration Utility with opened "Encryption" tab.
If an additional measure of security is desired on the wireless net-
work, WEP (Wired Equivalent Privacy) encryption can be enabled.
WEP encrypts each frame transmitted from the wireless adapter
using one of the keys entered in the "WEP Key Entry" field.
15
Summary of Contents for DWL-500 - 11Mb Wireless LAN PCI Network Card
