80 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
If you use the optional parameter
summary {<slot/port> | all}
, the dot1x configuration for
the specified port or all ports are displayed.
Port
The interface whose configuration is displayed.
Control Mode
The configured control mode for this port. Possible values are force-unauthor-
ized | force-authorized | auto.
Operating Control Mode
The control mode under which this port is operating. Possible val-
ues are authorized | unauthorized.
Reauthentication Enabled
Indicates whether re-authentication is enabled on this port.
Key Transmission Enabled
Indicates if the key is transmitted to the supplicant for the speci-
fied port.
If the optional parameter 'detail
<slot/port
>' is used, the detailed dot1x configuration for the
specified port are displayed.
Port
The interface whose configuration is displayed.
Protocol Version
The protocol version associated with this port. The only possible value is 1,
corresponding to the first version of the dot1x specification.
PAE Capabilities
The port access entity (PAE) functionality of this port. Possible values are
Authenticator or Supplicant.
Authenticator PAE State
Current state of the authenticator PAE state machine. Possible val-
ues are Initialize, Disconnected, Connecting, Authenticating, Authenticated,
Aborting, Held, ForceAuthorized, and ForceUnauthorized.
Backend Authentication State
Current state of the backend authentication state machine.
Possible values are Request, Response, Success, Fail, Timeout, Idle, and Ini-
tialize.
Quiet Period
The timer used by the authenticator state machine on this port to define peri-
ods of time in which it will not attempt to acquire a supplicant. The value is
expressed in seconds and will be in the range 0 and 65535.
Transmit Period
The timer used by the authenticator state machine on the specified port to
determine when to send an EAPOL EAP Request/Identity frame to the suppli-
cant. The value is expressed in seconds and will be in the range of 1 and
65535.
Guest VLAN ID
The ID of the VLAN used for unauthenticated or authentication failed
users.
Guest VLAN Period
The value, in seconds, of the timer used by the Guest VLAN Authenti-
cation. The guest VLAN timeout must be a value in the range of 1 and 300.
The default value is 90. The guest VLAN becomes operational after this time-
out is reached giving enough time to the user to get authenticated.
Supplicant Timeout
The timer used by the authenticator state machine on this port to time-
out the supplicant. The value is expressed in seconds and will be in the range
of 1 and 65535.
Summary of Contents for DWL-3500AP
