25
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
DTIM:
Fragment Length:
RTS Length:
Transmit Power:
(Delivery Traffic Indication Message) - Select a setting between 1and
255.
1
is the default setting. DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast messages.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
Super G Mode:
Super G is a group of performance enhancement features that
increase end user application throughput in an 802.11g network.
Super G is backwards compatible to standard 802.11g devices. For
top performance, all wirelss devices on the network should be Super
G capable. Select either Disabled, Super G without Turbo, Super G
with Dynamic Turbo, or Super G with Static Turbo.
Disabled:
Standard 802.11g support, no enhanced capabilities.
Super G
without
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and no Turbo mode.
Super G
with
Dynamic
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and Dynamic Turbo. This setting is backwards compatible
with non-Turbo (legacy) devices. Dynamic Turbo mode is
only enabled when all devices on the wireless network
are configured with Super G with Dynamic Turbo enabled.
Super G
with
Static
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and Static Turbo. This setting is not backwards compatible
with non-Turbo (legacy) devices. Static turbo mode is
always on and is only enabled when all the devices on
the wireless network are configured with Super G with
Static Turbo enabled.
802.11g only:
For increased speed in your network, enable this option. 802.11b
devices will be excluded.
Radio Wave:
Select ON or OFF.
