D-Link DWL-2700AP User Manual
1
To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP with an Ethernet
cable (see the
Network Layout
diagram).
First, disable the
Access the Internet using a proxy server
function. To disable this function, go to
Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.
Start your web browser program and type the IP address of the DWL-2700AP in the address field
(http://192.168.0.50) and press
Enter. Make sure that the IP addresses of the DWL-2700AP and your
computer are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note:
If you have changed the default IP address assigned to the DWL-2700AP, make sure to enter the
correct IP address.
• Type
admin in the User Name field
• Leave the
Password field blank
• Click
OK
Note:
If you have changed the password, make sure to enter the correct password.
Configuration
This section will show you how to configure your D-Link wireless access point using the
web-based configuration utility. If you would like to use the AP Manager II software, please
refer to the documentation located on the D-Link CD.
Web-based Configuration Utility
Summary of Contents for DWL-2700AP - AirPremier Outdoor Wireless Access...
Page 1: ......