D-Link DW-590, User Manual

Page: 128 / 136

8-2
5. Click Next to continue.
The installer now copies the necessary files to the SYSTEM directory.
6. Reboot the system.
RFSilent Setup
The RFSilent application allows you to enable or disable D-Link STA
References Designs. You can enable or disable the RFSilent application
through user-defined settings. Refer to a description of driver parameters in
the AP Programmer’s Reference Guide.
Operation
The RFSilent application is a Windows-based application that, once enabled,
appears as an icon (RF) in the right-hand corner of your Windows taskbar
(see Figure 8-1). You can automatically launch RFSilent at system boot-up
by entering a shortcut statement in the Startup folder.
Figure 8-1. RFSilent Icon
Position your cursor over the RF Icon in your toolbar and use your right or left
mouse button to display the RFSilent application selections (see Figure 8-2).
The radio button on the side of menu selections indicates the current state of
the RFSilent application.
Figure 8-2. RFSilent Menu Selections
Refer to Table 8-1 for a description of the RFSilent menu selections.
Table 8-1. RFSilent Menu Descriptions
RFSilent Menu Item Descriptions
Disable RF Signal Use this selection to
disable D-Link STA