manualshive.com logo in svg

D-Link DVS-210-1, User Manual, Page: 59 / 59

Share
Download
D-Link DVS-210-1 User Manual Download Page 59

59

D-Link DVS-210-1 User Manual

Appendix C - Technical Specifications

Technical Specifications

Hardware Specifications

 • Power Supply: DC 12V / 1.25A

 • Removable Storage: SD Card Slot (SDHC compliant)

Video Specifications

Codec

 • Simultaneous dual stream support (MPEG4 and M-JPEG)

 • Simultaneous profile support for web viewing, 3G mobile 

viewing, and video recording

 • JPEG compression for still images

Resolution

 • NTSC: D1 (720x480), CIF (352x240),

 

QCIF (176x120)

 • PAL: D1 (720x576), CIF (352x288),

 

QCIF (176x144)

Input

 • 1CH, NTSC/PAL, BNC connector

 • 1.0Vp-p with 75 Ω loading,

Audio Specifications

 • Two-way audio

 • External audio in

 • External audio out

 • G.726 codec

Networking Specifications

 • Ethernet: RJ45 - 10/100 Base-TX

 • Supported Protocols: IPv4, DHCP, ARP, DNS, TCP/IP, DDNS 

(D-Link), HTTP, HTTPS, UPnP™ Port Forwarding, Samba, 

SMTP, PPPoE, NTP (D-Link), FTP, RTP, RTSP, UDP, RTCP, 

ICMP, 3GPP

PTZ Specifications

 • Baud rates: 2400, 4800, 9600, 19200

 • Connector: RS-485 for PTZ control

Minimum System Requirements

 • CPU: Pentium 4, 2.4GHz and above

 • Hard Disk: 40 GB or higher

 • Memory: 512 MB or higher

 • Operating System: Windows 7 / Vista /

 

Windows XP with SP2 or higher /

 

Windows 2000 with SP4 or higher

 • Video Resolution: 1024x768 (SVGA/XGA)

 • Software: DirectX 9.0c or higher

 • Browser: Microsoft IE 6.0 or higher

Power Input

 • 100~240VAC, 50/60Hz, 12V DC 1.25A

Dimensions

 • 105.1(L) x 78.3 (W) x 35.7 (H) mm

Weight

 • 232g

Operating Temperature

 • 0° to 40°C (32° to 104°F)

Operating Humidity

 • 20% to 80% non-condensing

Certifications

 • CE (Class A)

 • C-Tick (Class A)

 • FCC (Class A)

Summary of Contents for DVS-210-1




























































Reviews:

No comments