manualshive.com logo in svg

D-Link DVS-210-1, User Manual, Page: 25 / 59

Share
Download
D-Link DVS-210-1 User Manual Download Page 25

25

D-Link DVS-210-1 User Manual

Image Setup

In this section, you may configure the video image settings for your Video Encoder. A preview of the image will be shown in Live Video.

Enable Privacy 

Mask:

Brightness:

Contrast:

Saturation:

The Privacy Mask setting allows you to specify up to 3 rectangular 

areas  on  the  camera's  image  to  be  blocked/excluded  from 

recordings and snapshots.

You may click and drag the mouse cursor over the camera image 

to draw a mask area.

Right clicking on the camera image brings up the following menu 

options:

Disable All: 

Disables all mask areas

Enable All: 

Enables all mask areas

Reset All:

 Clears all mask areas.

This setting is used to compensate for backlit scenes. You may choose a value between 0 and 255.

This setting may help to improve the image in some low light conditions. You may choose a value between 0 and 255.

This setting controls the strength of color. You may choose a value between 0 and 255.

Summary of Contents for DVS-210-1




























































Reviews:

No comments