DVG-G1402S User’s Manual
13
D-Link Systems, Inc.
Using the Configuration Utility
Using the Configuration Utility
Prior to using your Web browser for web-based management, if DHCP is not enabled on
your computer, be sure to assign a static IP address to the VoIP Router.
Use the computer that was last connected directly to your cable/DSL modem. Go to
Start
>
right-click
My Network Places
> select
Properties
> Right-click
Local Area Connection
> select
Properties
> double-click
Internet Protocol (TCP/IP)
.
Set your PC’s IP address to
192.168.15.15 and the subnet
mask to 255.255.255.0. The default
gateway and primary DNS server
IP addresses should be the LAN
IP address of the DVG-G1402S
router (192.168.15.1).
Click
OK
.
In order to use a web browser to configure the VoIP Router you must make sure it has a
valid Ethernet connection to a PC or LAN via its LAN port. Access the configuration utility to
check the LAN port by entering the IP Address into your web browser address field.
Type 192.168.15.1 (the IP
Address) into the address
field of your browser.
Summary of Contents for DVG-G1402S - Wireless Broadband VoIP Router
Page 1: ......