D-Link Systems, Inc.
Using the DVC-000
0
DVC-000 User’s Manual
When powered on and after completing the Setup Wizard, the DVC-2000 is in PSTN
Mode. To enter Broadband Mode, press the
Broadband
button on the DVC-2000 and
the screen above will appear. The larger
Main Window
displays the self-view until a
call is connected and then displays the party you are calling. The smaller
Self-View
Window
then displays the self-view when a call is connected. To toggle the images that
are in the
Main Window
and
Self-View Window
press the
Self/Remote
button.
Status Icons
The Status Icons appear only briefly at startup. The DVC-2000 uses icons to indicate
the unit status. The icons appear on the upper right side of the
Main Screen
. If an
icon appears, it indicates an operation is not complete. The icon will disappear after
the operation has been completed. If the icon appears with a yellow “X” through it, this
means the operation was unsuccessful. If the
Directory Service
status icon is displayed
with an “X” through it, you can still make VideoPhone calls by entering the IP address
of the phone that you are calling (See
Calling a VideoPhone or H.323 Device with
an IP Address
on page 27). Below are the status icons:
Using the DVC-2000 in Broadband Mode
Layout of the i2eye Broadband Screen
Main
Win-
Self-View
Window
Main
Settings
Buttons
Banner
Window
Status Message
Area
Status
Icons
Privacy
Status
Icons
Obtaining the Public IP address (Router’s Address)
DVC-2000 is registering with the Directory Service
Looking for i2eye updates
P
DS
Broadband.Mode
