47
LACP packets to the peer. The advantages of LACP are (1) increases the bandwidth.
(2) failover when link status fails on a port.
Trunking / LACP setting can be changed by clicking the button “Aggregation”.
Figure 4.3.1.3
(Figure 4.3.1.3: There are 2 iSCSI data ports on each controller, select at least two NICs for link
aggregation.)
Figure 4.3.1.4
For example, LAN1 and LAN2 are set as Trunking mode. To remove Trunking / LACP
setting, check the gray button of LAN port, click “Delete link aggregation”. Then it will
pop up a message to confirm.
•
Ping host:
User can ping the corresponding host data port from the target, click “Ping host”.
