D-Link DSN-5210-10 - xStack Storage Area Network Array Hard... Hardware Reference Manual Download Page 4

Page: 4 / 52

Notice of Export Controls

Export of technical data contained in this document may require an export license from the
United States government. Please contact D-Link Systems, Inc. for any export compliance
questions.

Document Revision Level

Revision

Date

Description

Version 1.0

January 2009

Version 1.0: initial release

Version 1.1

June 2009

Version 1.1: updated for software version 2.5.0 and redundant controllers

Version 1.2

September 2009 Version 1.2: minor formatting updates and clarification of network

connections when using dual controllers

Version 1.3

December 2009 Version 1.3: updated for 84 drive support and version 2.6.0 software

Version 1.4

May 2010

Version 1.4: added DSN-5110 and other minor updates

Summary of Contents for DSN-5210-10 - xStack Storage Area Network Array Hard...





















































Search results

Summary of Contents for DSN-5210-10 - xStack Storage Area Network Array Hard...

Reviews:

Related manuals for DSN-5210-10 - xStack Storage Area Network Array Hard...

Brands by name

Popular brands

D-Link DSN-5210-10 - xStack Storage Area Network Array Hard..., Hardware Reference Manual

Search results

Summary of Contents for DSN-5210-10 - xStack Storage Area Network Array Hard...

Reviews:

Related manuals for DSN-5210-10 - xStack Storage Area Network Array Hard...

Brands by name

Popular brands