xStack Storage DSN-3200 & DSN-3400
ECN – Drive Activity Light Fix
D-Link Systems, Inc. Page
6
February 7, 2008
Figure 5: A bare chassis backplane showing the four 10-position headers
Step 7) If you see a jumper block installed on each of these four headers like that shown in Figure 6, then
you will need to proceed to Section 2 for instructions on installing the new resistor packs. If you see a
modified jumper like that found in figure 7, then your system has been modified with the necessary resistor
packs. You may close your unit’s cover and return to normal operation.
Figure 6: A jumper block installed on a 10-position jumper
