D-Link DSN-1100, User Manual

Page: 51 / 137

xStack Storage Management Center Software User’s Guide 41
Figure 3-20. Successfully Created Volume Message
11. Click Close to close the Wizard and return to the Volume View.
3.3 Performing Volume Actions
After you create volumes, you can use the Volume Actions panel to perform the
following activities:

Grant or revoke volume access to iSCSI initiators. See section 3.3.1.

Scan a volume. See section 3.3.2.

Destroy a volume. See section 3.3.3.

Grow a volume. See section 3.3.4.

Reconfigure a volume. See section 3.3.5.

Show advanced extents in the Extents tab. See section 3.4.2.
3.3.1 Granting or Revoking iSCSI Access to Volumes
During the volume creation process, you can grant or revoke volume access to iSCSI
initiators. To change this setting, use the following procedure and record your settings
in Table C-2.
1. In the Volume View, click a volume in the Main Display.
2. Perform one of the following steps:
–
On the Volumes menu, click Grant/Revoke Access.
–
Click Grant/Revoke Access in the Volume Actions panel.