D-Link DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS... Installation Manual Download

Page: 2 / 24

D-Link Systems, Inc.

DSM-G600 Install Guide

System Requirements

Computer with Windows

XP or 2000

Internet Explorer 6.0 or Netscape

Navigator 7.0 and above

An 802.11g/b wireless network

USB Hard Drive and/or Internal 3.5” PATA/IDE Hard Drive

An available Ethernet port on the network*

Manual and Software

on CD

Package Contents

D-Link DSM-G600

Wireless Storage Enclosure

Ethernet Cable

12V 3A Power Supply

* It is required that an Ethernet cable is used during initial setup. Once

your wireless conﬁguration is set, you may disconnect the Ethernet cable

and begin communicating wirelessly with your DSM-G600.

System Requirements

Note: Using a power supply with a

different voltage will cause damage

and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

Summary of Contents for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...

























Search results

Summary of Contents for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...

Reviews:

Related manuals for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...

Brands by name

Popular brands

D-Link DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS..., Installation Manual

Search results

Summary of Contents for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...

Reviews:

Related manuals for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...

Brands by name

Popular brands