D-Link DSM-510 - MediaLounge High-Definition Media Player User Manual Download

Page: 8 / 107

D-Link DSM-510 User Manual

Section 1 - Product Overview

• D-Link DSM-510 High-Definition Media Player

• Quick Install Guide

• Manual, QIG, software, and warranty on CD

• 2dBi Wireless Antenna

• Ethernet (CAT5-UTP/Straight-Through) Cable

• Composite RCA Audio/Video Cable

• Remote Control with 2AAA Batteries

• Power Adapter

• Vertical Stand

Note:

Please remove the plastic covers attached to the unit so that proper ventilation is allowed.

If any of the above items are missing, please contact your reseller.

Minimum System Requirements

• PC with:

Windows

Vista

™

/XP

1GHz plus processor

Memory Size: 512MB or above

100MB of available hard drive space and a wireless or Ethernet network.

• TV with Composite Video, or HDMI Input.

• Stereo or A/V Receiver with Composite Audio, or Optical Digital.

• If you want to connect the DSM-510 to a Windows XP-based PC without Intel

Viiv

™

technology, use

the included CD for steps on how to configure Windows

Media Player 11 software and refer to this

manual.

Product Overview

Package Contents

Recommended

• Windows

Vista/XP MCE-based PC with Intel

Viiv

™

technology.

• An Intel

Viiv

™

technology verified router.

• Broadband Connection for Accessing Online Content.
• Wired or Wireless Network (Wired network is recommended for video streaming).

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player












































































































Search results

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player

Reviews:

Related manuals for DSM-510 - MediaLounge High-Definition Media Player

Brands by name

Popular brands

D-Link DSM-510 - MediaLounge High-Definition Media Player, User Manual

Search results

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player

Reviews:

Related manuals for DSM-510 - MediaLounge High-Definition Media Player

Brands by name

Popular brands