D-Link DSM-510 - MediaLounge High-Definition Media Player User Manual Download

Page: 13 / 107

D-Link DSM-510 User Manual

Section - Installation

Turn on the computer and insert the D-Link DSM-510 CD into the CD-ROM
drive.

If the Autorun function does not automatically start on your computer, click
Windows

Start > Run

. In the Run command box type “

D:\DSM510.exe

”, where

D: represents the drive letter of your CD-ROM.

Click

Setup

Clicking “Setup” on a PC that does not contain Intel

Viiv

™

technology, will launch the Windows

Media Player and

Setup Guide with instructions on how to setup your Windows

Media Player 11 for sharing. This is a UPnP AV compliant

media server software that allows you to share your music, photos or video files to the DSM-510. Please continue to
the section “Windows

Media Player 11 Installation” on page 26 for more information.

After configuring Windows

Media Player 11, refer to page 15 to connect your DSM-510.

If your PC is Intel

Viiv

™

technology based, clicking on “Install Media Server” will confirm your PC has the latest version

of the Intel

Viiv

™

software and update it if necessary. This software includes the Intel

Viiv

™

Media Server.

At the Intel

Viiv

™

software setup screen, select the option

Yes, start Intel Viiv Settings now (recommended)

Click

Next

to start the installation process, and at the next screen click

add a device

Note:

Click “Install DivX

” to install the DivX

player, DivX

codec, and the DivX

Converter software on the PC. The

DivX

Converter software converts other file types to DivX

files.

Setup

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player












































































































Search results

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player

Reviews:

Related manuals for DSM-510 - MediaLounge High-Definition Media Player

Brands by name

Popular brands

D-Link DSM-510 - MediaLounge High-Definition Media Player, User Manual

Search results

Summary of Contents for DSM-510 - MediaLounge High-Definition Media Player

Reviews:

Related manuals for DSM-510 - MediaLounge High-Definition Media Player

Brands by name

Popular brands