1
D-Lnk DSM-210 User Manual
By default the DSM-210 is set to DHCP, allowing your network settings to be automatically configured from your router
or DHCP server. Most networks have DHCP enabled. If you are not sure, please verify your router’s settings.
Network Settings
If you would like to manually enter your network information, select
Static
and press
Enter
. Enter the IP settings and
select
OK
to save. When DHCP is selected, the fields will be blacked out.
Verify your settings listed below
Current Settings
.
IP Address Mode:
Displays Static or DHCP.
IP Address:
The current IP Address of your
DSM-210.
Subnet Mask:
The current subnet mask.
Default Gateway:
The IP Address of your router or
gateway.
DNS1/DNS2
: The addresses of your DNS server
(usually the IP address of your router)
SSID:
The name of the wireless network you are
connected to (Wireless mode only).
Channel:
Displays the wireless channel you are connected to (Wireless mode only).
Summary of Contents for DSM-210 - Wireless Internet Photo Frame
Page 1: ......
