38
DSM-120 User’s Manual
D-Link Systems, Inc.
Connecting the DSM-120
Network Connections
Note:
You may have an Ethernet cable plugged into the unit and also connect wirelessly.
Neither will interfere with the other, but only one network can be accessed at a time (wired
or wireless). The network connection type is selected in the Setup Wizard and can also
be changed by going to the Setup Menu. To access the Setup Menu, select
Setup
on the
menu and press
Enter
on the remote control.
•
Wireless Connection
If you are connecting wireless using the
built-in antenna, then you do not need to
connect the supplied Ethernet cable.
For an optimal wireless connection,
place the antenna at a 90
o
angle as
shown in the image to the right.
Select one of two ways to connect your DSM-120 to your network:
•
RJ-45 Ethernet Connector
If you are connecting wired, insert the
supplied Ethernet cable into the Ethernet
network cable connector. Attach the other
end to a router or hub on your network.
Summary of Contents for DSM-120
Page 1: ......
