11
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
This section is only relevant if you enabled the Wireless Radio on your
DSL-G604T Router at Step 7. If you disabled the Wireless Radio, please
proceed to page 11.
Step 7A – Set Wireless Connection
You will now be asked to set security to your wireless network. Type in your
desired SSID name, select a Channel, and set your preferred Encryption
settings for your wireless network. Please refer to your User Manual for more
information.
Important Note: You are strongly advised to enable Encryption on your
wireless network, as this will deter hackers from gaining access to your
network.
Enter your
SSID
Name
Select your
Channel
Select your
Encryption
Preferences
Click
Next
to
continue
