119
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 6 - Connecting To Your Wireless Network
Connect a Wireless Client to your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 1
- Press the WPS button on the back of DSL-G225 for about 1 second. The Internet LED on the front will start to blink.
Step 3
- Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
WPS Button
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DSL-G225 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
