Section 2 – Installation
D-Link
DSL-526B
User
Manual
16
Factory Reset Button
The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following
sequence:
1. Press and hold the reset button while the device is powered off.
2. Turn on the power.
3. Wait for 5~8 seconds and then release the reset button.
Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings
will be restored to the factory default IP address
192.168.1.1
and the subnet mask
255.255.255.0
, the default management Username is “admin”
and the default Password is “tot”.
Summary of Contents for DSL-526B
Page 1: ...1 刪除 sp ...
