93
D-Link DSL-3590L User Manual
Section 4 - Configuration
Network
Enter the IP address of the router. The default IP address is
192.168.1.1
.
If you change the IP address, once you click
Save
, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0
.
The default address to access the router’s configuration is
http://dlinkrouter.local./
Here, you can replace
dlinkrouter
with
a name of your choice.
Enter the domain name (optional).
Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use the router for a DNS
server.
Enable or disable the DHCP server.
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note:
If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
LAN IP Address:
Subnet Mask:
Management
Link:
Local Domain
Name:
Enable DNS
Relay:
Status:
DHCP IP
Address Range:
This section will allow you to change the local network settings of the router and to
configure the DHCP settings. In the Settings menu on the bar on the top of the page,
click
Network
. Click
Advanced Settings...
to expand the list and see all of the options.
