DSL-300 ADSL Modem User’s Guide
16
Change Connection Type to PPPoA
To change the connection type to PPPoA and connect to the Internet, follow these steps:
1. In
the
Account Configuration
window, select
PPPoA
from the
Connection Type
pull-down menu.
The web page display will change to present this menu:
Figure 5. PPPoA Account Configuration – Initial Set Up
2. DO NOT change the
Encapsulation
setting unless your ADSL service provider or ISP has instructed
you to change it. By default, the
LLC
is selected. If you are told to change this, select
VC Mux
from
the pull-down menu.
3. In
the
User Name
entry field, type the user name used to identify your account.
4. In
the
Password
entry field, type the password used to authenticate your account
5. DO NOT change the
Authentication
method unless your ADSL service provider or ISP has instructed
you to change it. By default, the
pap
protocol is selected. If you are told to change this, select
chap
from the pull-down menu.
6. Leave
the
Connect on Demand
option
enabled
in the pull-down menu. This simply means that the
Modem will begin the connection process when it restarts.
7. Leave
Idle Time
set to the 0. This tells the Modem to maintain the “always on” connection, even when
you are not using the Internet.
8. Click on the
OK
button.
Summary of Contents for DSL-300G+
Page 1: ...DSL 300G ADSLModem User sGuide Sep 2002 651L300G 015 ...
Page 10: ......
Page 15: ...DSL 300 ADSL Modem User s Guide 5 ...
Page 42: ......
