DSL-2600U
ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
Basic Settings
On the
Wi-Fi / Basic settings
page, you can configure basic parameters of the router's WLAN.
Figure 63. Basic settings of the wireless LAN.
Parameter
Description
Hide Access Point
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
SSID
A name for the WLAN. By default, the value
DSL-2600U
is
specified. It is recommended to specify another name for the
network upon initial configuration (use digits and Latin characters).
BSSID
The parameter that uniquely identifies your wireless network. You
cannot change the value of this parameter.
Country
The country you are in. Select a value from the drop-down list.
Channel
The wireless channel number. By default, channel 6 is specified. If
you want to use another channel, select a value from the drop-down
list. When the
auto
value is selected, the router itself chooses the
channel with the least interference.
Clients Isolation
Select the checkbox to isolate the users of your WLAN (to forbid
wireless clients to communicate to each other).
Enable Wireless Guest
Network
Select the checkbox to create a separate part of your WLAN with
open authentication type and with no password. Wireless devices
connected to this network can access the Internet, but are isolated
from the router's LAN.
Guest SSID
A name for the guest part of your WLAN.
When you have configured the parameters, click the
Change
button.
Page
69
of 112
