background image

DSL-200 ADSL USB Modem User’s Guide 

 

Limited Warranty 

 

Hardware:  

D-Link warrants its hardware products to be free from defects in workmanship and materials, under 
normal use and service, for the following periods measured from date of purchase from D-Link or 
its Authorized Reseller: 

Product Type 

  Warranty 

Period 

Complete products 

 

One year 

Spare parts and spare kits 

90 days 

 

The one-year period of warranty on complete products applies on condition that the product's 
Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. 
A list of D-Link offices is provided at the back of this manual, together with a copy of the 
Registration Card. Failing such timely registration of purchase, the warranty period shall be limited 
to 90 days. 
If the product proves defective within the applicable warranty period, D-Link will provide repair or 
replacement of the product. D-Link shall have the sole discretion whether to repair or replace, and 
replacement product may be new or reconditioned. Replacement product shall be of equivalent or 
better specifications, relative to the defective product, but need not be identical. Any product or part 
repaired by D-Link pursuant to this warranty shall have a warranty period of not less than 90 days, 
from date of such repair, irrespective of any earlier expiration of original warranty period. When 
D-Link provides replacement, then the defective product becomes the property of D-Link. 
Warranty service may be obtained by contacting a D-Link office within the applicable warranty 
period, and requesting a Return Material Authorization (RMA) number. If a Registration Card for 
the product in question has not been returned to D-Link, then a proof of purchase (such as a copy of 
the dated purchase invoice) must be provided.    If Purchaser's circumstances require special 
handling of warranty correction, then at the time of requesting RMA number, Purchaser may also 
propose special procedure as may be suitable to the case. 
After an RMA number is issued, the defective product must be packaged securely in the original or 
other suitable shipping package to ensure that it will not be damaged in transit, and the RMA 
number must be prominently marked on the outside of the package. The package must be mailed or 
otherwise shipped to D-Link with all costs of mailing/shipping/insurance prepaid; D-Link will 
ordinarily reimburse Purchaser for mailing/shipping/insurance expenses incurred for return of 
defective product in accordance with this warranty. D-Link shall never be responsible for any 
software, firmware, information, or memory data of Purchaser contained in, stored on, or integrated 
with any product returned to D-Link pursuant to this warranty. 
Any package returned to D-Link without an RMA number will be rejected and shipped back to 
Purchaser at Purchaser's expense, and D-Link reserves the right in such a case to levy a reasonable 
handling charge in addition mailing or shipping costs. 

 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within the 
applicable warranty period. A list of D-Link offices is provided at the back of this manual, together 
with a copy of the Registration Card. If a Registration Card for the product in question has not been 
returned to a D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) 
must be provided when requesting warranty service. The term "purchase" in this software warranty 
refers to the purchase transaction and resulting license to use such software. D-Link warrants that 
its software products will perform in substantial conformance with the applicable product 
documentation provided by D-Link with such software product, for a period of ninety (90) days 
from the date of purchase from D-Link or its Authorized Reseller. D-Link warrants the magnetic 
media, on which D-Link provides its software product, against failure during the same warranty 
period. This warranty applies to purchased software, and to replacement software provided by 

Summary of Contents for DSL-200



















































Reviews: