DSL-200 ADSL USB Modem User’s Guide
13
4) In the Select Service Provider window, select
Other Service Provider
and click
Next
.
5) In the Select Driver Type window, choose the driver that best suits your ADSL connection, and then
click
Next
.
6) In
the
Communication Settings
window you must provide the PVC settings,
Encapsulation
method
and
Modulation
method for configuring the Modem. Type in the VPI and VCI values in their respective
fields.
7) In the same window, select the appropriate
Encapsulation
method from the drop-down menu. You will
select the encapsulation setting that is appropriate for the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using RFC 2364 PPPoATM and
your service provider have not specified an encapsulation setting, use RFC 2364 PPPoATM NULL
Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation setting. If your service
provider has not specified an encapsulation setting, use RFC 1483 IPoATM Bridged LLC
Encapsulation.
8) Again in the same window, select the proper Modulation settings using the drop-down menu. Your
service provider will give you the appropriate Modulation settings. Choose T1.413, Multimode, G.Lite or
G.DMT. If your service provider has not specified a modulation setting, use Multimode. Click
Next
to
continue.
At this point you must choose the Encapsulation method and Modulation technique
used for your ADSL connection. Be sure to have the correct information available.
Click
Next
.
Click
Next
.
Select
WAN Driver
