D-Link DSL-200 - 8 Mbps DSL Modem, User Manual

Page: 8 / 41

Before You Start
In addition to the Modem hardware and software drivers, you will to gather information
before you begin to install the device. Your DSL service provider will give you information
required for a successful ADSL connection. You will use this information when you decide
which driver to install and when you configure the Modem. In order to avoid problems
please read this section and make sure you understand all the prerequisites for proper
installation of your new Modem.
Operating Systems
The D-Link DSL-200 can be used with PCs running Microsoft ® Windows 98, Windows 98
Second Edition, Windows 2000, Windows Millennium Edition or Windows XP.
ü
USB Port
In addition to the Windows OS, you will need a USB (Universal Serial Bus) type B port on
your computer. These are commonly installed on newer computers, however older PCs may
require an additional installation.
Microfilters and Splitters
Most ADSL clients will be required to install a simple device that prevents the ADSL line
from interfering with regular telephone services. These devices are commonly referred to as
microfilters or sometimes called (inaccurately) line splitters. They are easy to install and use
standard telephone connectors and cable.
Some DSL service providers will send a telecommunications technician to modify the
telephone line, usually at the point where the phone line enters the building. If a technician
has divided or split your telephone line into two separate lines - one for regular telephone
service and the other for ADSL
– then you do not need to use any type of filter device. Follow
the instructions given to you by your DSL service provider about where and how you should
connect the Modem to the ADSL line.