background image

DSL-200 ADSL USB Modem User

s Guide 

 

ii

Limited Warranty 

Hardware: 

D-Link warrants its hardware products to be free from defects in workmanship and 
materials, under normal use and service, for the following periods measured from date of 
purchase from D-Link or its Authorized Reseller: 

 

Product Type 

 

 

Warranty Period 

 

Complete products 

 

 

One year 

 

Spare parts and spare kits 

90 days 

The one-year period of warranty on complete products applies on condition that the 
product's Registration Card is filled out and returned to a D-Link office within ninety (90) 
days of purchase.  A list of D-Link offices is provided at the back of this manual, together 
with a copy of the Registration Card.  Failing such timely registration of purchase, the 
warranty period shall be limited to 90 days. 

If the product proves defective within the applicable warranty period, D-Link will provide 
repair or replacement of the product.  D-Link shall have the sole discretion whether to 
repair or replace, and replacement product may be new or reconditioned.  Replacement 
product shall be of equivalent or better specifications, relative to the defective product, but 
need not be identical.  Any product or part repaired by D-Link pursuant to this warranty 
shall have a warranty period of not less than 90 days, from date of such repair, irrespective 
of any earlier expiration of original warranty period.  When D-Link provides replacement, 
then the defective product becomes the property of D-Link. 

Warranty service may be obtained by contacting a D-Link office within the applicable 
warranty period, and requesting a Return Material Authorization (RMA) number.  If a 
Registration Card for the product in question has not been returned to D-Link, then a proof 
of purchase (such as a copy of the dated purchase invoice) must be provided.  If Purchaser's 
circumstances require special handling of warranty correction, then at the time of 
requesting RMA number, Purchaser may also propose special procedure as may be suitable 
to the case. 

After an RMA number is issued, the defective product must be packaged securely in the 
original or other suitable shipping package to ensure that it will not be damaged in transit, 
and the RMA number must be prominently marked on the outside of the package.  The 
package must be mailed or otherwise shipped to D-Link with all costs of 
mailing/shipping/insurance prepaid; D-Link will ordinarily reimburse Purchaser for 
mailing/shipping/insurance expenses incurred for return of defective product in accordance 
with this warranty.  D-Link shall never be responsible for any software, firmware, 
information, or memory data of Purchaser contained in, stored on, or integrated with any 
product returned to D-Link pursuant to this warranty. 

Any package returned to D-Link without an RMA number will be rejected and shipped back 
to Purchaser at Purchaser's expense, and D-Link reserves the right in such a case to levy a 
reasonable handling charge in addition mailing or shipping costs.

 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within the applicable 
warranty period.  A list of D-Link offices is provided at the back of this manual, together with a copy of the 
Registration Card.  If a Registration Card for the product in question has not been returned to a D-Link office, 
then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting 
warranty service.  The term "purchase" in this software warranty refers to the purchase transaction and resulting 
license to use such software. 
D-Link warrants that its software products will perform in substantial conformance with the applicable product 
documentation provided by D-Link with such software product, for a period of ninety (90) days from the date of 

Summary of Contents for DSL-200 - 8 Mbps DSL Modem










































Reviews: