-
2
-
Installing the DSB-650TX
§
Plug the “
A
” connector of the
USB cable provided into an
available USB slot on your
computer. This is the narrow
end of the cable.
§
Plug the “
B
” connector of the
USB cable into the
DSB-650TX. This is the larger
end of the cable.
§
Connect one end of a
straight-through Ethernet
cable to the RJ-45 port of the
DSB-650TX.
§
Connect the other end of the
Ethernet cable to a switch or
broadband modem.
§
Windows will detect the
DSB-650TX and ask you for
the drivers. Refer to the
following section below that
corresponds to your operating system.
Type A
Type B
RJ45
RJ45
