D-Link DPR-160 User Manual
Section - Troubleshooting
• Configure your Internet settings:
• Go to
Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
• Click the
Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click
OK.
• Go to the
Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address
bar. This should open the login page for your the web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait
about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different
computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your print server. Unfortunately this process will change all your settings
back to the factory defaults.
To reset the print server, locate the reset button (hole) on the rear panel of the unit. With the print server powered on,
use a paperclip to hold the button down for 10 seconds. Release the button and the print server will go through its reboot
process. Wait about 30 seconds to access the print server. The default IP address is 192.168.0.10. When logging in to
the print server, leave the password blank (default setting).
