when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message
containing the AutoProvisioning Server URL where
the phones can request their configuration.
PnP Server
Specify the PnP Server.
PnP Port
Specify the PnP Server.
PnP Transport
Specify the PnP Transfer protocol.
PnP Interval
Specify the Interval time, unit is hour.
Phone Flash
Server Address
SetFTP/TFTP/HTTP server IP address for auto
update. The address can be IP address or Domain
name with subdirectory.
Config File Name
Set configuration file’s name which need to update.
System will use MAC as config file name if config file
name keep blank. For example, 000102030405.
Protocol Type
Specify the Protocol type FTP, TFTP or HTTP.
Update Interval
Specify update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update.
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
TR069 Settings
Enable TR069
Enable TR069 by selecting it.
ACS Server Type
Specify the ACS Server Type.
ACS Server URL
Specify the ACS Server URL.
ACS User
Specify ACS User.
ACS Password
Specify ACS Password.
TR069 Auto Login Enable TR069 Auto Login by selecting it.
"Inform" Sending
Period
Specify the “inform” Sending Period, unit is second.
7.3.1.23
SYSLOG
Syslog is a protocol which is used to record the log messages with client/server
mechanism. Syslog server receives the messages from clients, and classifies them
based on priority and type. Then these messages will be written into log by some
rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency:This is highest default debug info level. You system cannot
work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
