3
Next, make sure that the Printer is turned
OFF
.
Using the USB cable, connect one end of the cable to the USB port of the
DP-301U (shown below) and the other end to the USB port of the printer.
Turn
ON
the printer.
Receptor for AC
Power Adapter
Warning!
Only a USB printer may be connected to the USB port of the DP-301U.
Do not connect any other USB device to the USB port; to do so may damage the unit,
voiding the warranty for this product.
First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into
the “Network Port” (shown below.) Connect the other end of the cable to the
LAN port of the gateway or switch.
Note: Do not connect the power cord to the DP-301U until you are advised
to do so
Then, plug one end of the power adapter into the DP-301U and the other
end into your electric outlet.
The DP-301U will turn on and begin a self-test.
Connecting The DP-301U
To Your Network
USB Port
Network Port
For Mac OS printing, please refer to users manual located on CD-ROM
Summary of Contents for DP 301U
Page 13: ......