D-Link DOR-890l User Manual Download Page 112

Page: 112 / 149

108

D-Link DIR-890L User Manual

Section 4 - Configuration

Dynamic DNS

Most Internet service providers (ISPs) assign dynamic (changing) IP addresses. Using

a dynamic DNS service provider, people can enter your domain name in their web

browser to connect to your server no matter what your IP address is.

In the Features menu on the bar on the top of the page, click

Dynamic DNS

Enabling dynamic DNS will reveal further configuration options.

Displays the current dynamic DNS connection status.

Enter the address of your dynamic DNS server, or select one from

the drop-down menu.

Enter the host name that you registered with your dynamic DNS

service provider.

Enter your dynamic DNS username.

Enter your dynamic DNS password.

Enter a timeout time (in hours).

Click

Save

when you are done.

Enable

Dynamic DNS:

Status:

Server Address:

Host Name:

User Name:

Password:

Time Out:

At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic

DNS host, refer to page 109.

Summary of Contents for DOR-890l






















































































































































Search results

Summary of Contents for DOR-890l

Reviews:

Related manuals for DOR-890l

Brands by name

Popular brands

D-Link DOR-890l, User Manual

Search results

Summary of Contents for DOR-890l

Reviews:

Related manuals for DOR-890l

Brands by name

Popular brands