D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual Download

Page: 46 / 86

D-Link DNS-343 User Manual

Section 3 - Configuration

E-Mail Alerts

Alert Settings

Alert Types

With the DNS-343 E-Mail Alerts, you can configure e-mails to be sent alerting you to certain operational conditions and
drive status conditions. These alerts can prove helpful with the management and safeguarding of important data.

This section contains the configuration
settings for your e-mail account and alert
preferences.

After you have configured the settings,
use the

Test E-Mail

button to send a

test e-mail and confirm your settings
are correct.

A pop-up window will display the success
or failure of the test.

This section contains the alert options
and their configuration settings.

Refer to page 48 for more information.

Click

Save Settings

to apply and save

the new alert settings.

Save Settings

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150























































































Search results

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150

Reviews:

Related manuals for DNS-343 - NAS Server - Serial ATA-150

Brands by name

Popular brands

D-Link DNS-343 - NAS Server - Serial ATA-150, Product Manual

Search results

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150

Reviews:

Related manuals for DNS-343 - NAS Server - Serial ATA-150

Brands by name

Popular brands