D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual Download Page 44

Page: 44 / 86

D-Link DNS-343 User Manual

Section 3 - Configuration

System

Restart

Defaults

Configuration

Settings

Idle Time

The DNS-343 System menu provides options to perform a system restart, save and load configuration settings, and
set idle times.

Click

Restart

to reboot the DNS-343.

Click

Restore

to reset the DNS-343 to its factory default

settings. This will erase all previous configuration
changes.

Click

Shutdown

to turn off the DNS-343.

Click

Save

to save the current DNS-343 configuration

settings to a file on the local computer. If at a later time
you need to reload this configuration after a system
reset, browse to the file and click

Load

Enter the time (in minutes) that the administrator
will be allowed to remain idle while accessing the
DNS-343 configuration settings or that users will be
allowed to remain idle while accessing the download
schedule settings.

Click

Apply

to save the settings.

Shutdown

Apply

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150























































































Search results

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150

Reviews:

Related manuals for DNS-343 - NAS Server - Serial ATA-150

Brands by name

Popular brands

D-Link DNS-343 - NAS Server - Serial ATA-150, Product Manual

Search results

Summary of Contents for DNS-343 - NAS Server - Serial ATA-150

Reviews:

Related manuals for DNS-343 - NAS Server - Serial ATA-150

Brands by name

Popular brands