D-Link DNS-300 Page 44 Manual Download

Page: 44 / 70

2. If you want to remove the USB device, please click the

Eject

button in the top half of the window

before

removing the device

from the disk station.

USB Printer

By connecting the USB printer to DNS-300, you would be able to share the USB printer

through the network and USB printer status will become active in this page.

Refresh the USB printer's status

Click

Refresh

to update the printer status.

Eject the USB printer

We suggest clicking the

Eject

button before you remove the printer.

Steps for configuring USB printer in Windows

1. Open

My Network Places

and connect to the DNS-300.

Note:

To take advantage of the D-Link USB Fast Copy function,

insert your USB Flash device into the USB port and push

the Power button after 3 to 4 seconds have elapsed. This

will initiate a Fast Copy to your NAS.

Warning!!

All data on your disk will be deleted by formatting. It

cannot be restored, so please take care before

formatting.

Summary of Contents for DNS-300







































































Search results

Summary of Contents for DNS-300

Reviews:

Related manuals for DNS-300

Brands by name

Popular brands

D-Link DNS-300, Manual

Search results

Summary of Contents for DNS-300

Reviews:

Related manuals for DNS-300

Brands by name

Popular brands