D-Link DNS-1100-04 Product Manual Download

Page: 137 / 139

134

D-Link ShareCenter Pro 1100 User Manual

Appendix G - Warranty

Disclaimer of Other Warranties:

EXCEPT.FOR.THE.LIMITED.WARRANTY.SPECIFIED.HEREIN,.THE.PRODUCT.IS.PROVIDED.“AS-IS”.WITHOUT.ANY.WARRANTY.OF.ANY.KIND.WHATSOEVER.

INCLUDING,.WITHOUT.LIMITATION,.ANY.WARRANTY.OF.MERCHANTABILITY,.FITNESS.FOR.A.PARTICULAR.PURPOSE.AND.NONINFRINGEMENT..

IF.ANY.IMPLIED.WARRANTY.CANNOT.BE.DISCLAIMED.IN.ANY.TERRITORY.WHERE.A.PRODUCT.IS.SOLD,.THE.DURATION.OF.SUCH.IMPLIED.WARRANTY.

SHALL.BE.LIMITED.TO.THE.DURATION.OF.THE.APPLICABLE.WARRANTY.PERIOD.SET.FORTH.ABOVE..EXCEPT.AS.EXPRESSLY.COVERED.UNDER.THE.

LIMITED.WARRANTY.PROVIDED.HEREIN,.THE.ENTIRE.RISK.AS.TO.THE.QUALITY,.SELECTION.AND.PERFORMANCE.OF.THE.PRODUCT.IS.WITH.THE.

PURCHASER.OF.THE.PRODUCT.

Limitation of Liability:

TO.THE.MAXIMUM.EXTENT.PERMITTED.BY.LAW,.D-LINK.IS.NOT.LIABLE.UNDER.ANY.CONTRACT,.NEGLIGENCE,.STRICT.LIABILITY.OR.OTHER.LEGAL.

OR.EQUITABLE.THEORY.FOR.ANY.LOSS.OF.USE.OF.THE.PRODUCT,.INCONVENIENCE.OR.DAMAGES.OF.ANY.CHARACTER,.WHETHER.DIRECT,.SPECIAL,.

INCIDENTAL.OR.CONSEQUENTIAL.(INCLUDING,.BUT.NOT.LIMITED.TO,.DAMAGES.FOR.LOSS.OF.GOODWILL,.LOSS.OF.REVENUE.OR.PROFIT,.WORK.

STOPPAGE,.COMPUTER.FAILURE.OR.MALFUNCTION,.FAILURE.OF.OTHER.EQUIPMENT.OR.COMPUTER.PROGRAMS.TO.WHICH.D-LINK’S.PRODUCT.

IS.CONNECTED.WITH,.LOSS.OF.INFORMATION.OR.DATA.CONTAINED.IN,.STORED.ON,.OR.INTEGRATED.WITH.ANY.PRODUCT.RETURNED.TO.D-LINK.

FOR.WARRANTY.SERVICE).RESULTING.FROM.THE.USE.OF.THE.PRODUCT,.RELATING.TO.WARRANTY.SERVICE,.OR.ARISING.OUT.OF.ANY.BREACH.OF.

THIS.LIMITED.WARRANTY,.EVEN.IF.D-LINK.HAS.BEEN.ADVISED.OF.THE.POSSIBILITY.OF.SUCH.DAMAGES..THE.SOLE.REMEDY.FOR.A.BREACH.OF.

THE.FOREGOING.LIMITED.WARRANTY.IS.REPAIR,.REPLACEMENT.OR.REFUND.OF.THE.DEFECTIVE.OR.NONCONFORMING.PRODUCT..THE.MAXIMUM.

LIABILITY.OF.D-LINK.UNDER.THIS.WARRANTY.IS.LIMITED.TO.THE.PURCHASE.PRICE.OF.THE.PRODUCT.COVERED.BY.THE.WARRANTY..THE.FOREGOING.

EXPRESS.WRITTEN.WARRANTIES.AND.REMEDIES.ARE.EXCLUSIVE.AND.ARE.IN.LIEU.OF.ANY.OTHER.WARRANTIES.OR.REMEDIES,.EXPRESS,.IMPLIED.

OR.STATUTORY.

Governing Law:

This.Limited.Warranty.shall.be.governed.by.the.laws.of.the.State.of.California..Some.states.do.not.allow.exclusion.or.limitation.of.incidental.or.

consequential.damages,.or.limitations.on.how.long.an.implied.warranty.lasts,.so.the.foregoing.limitations.and.exclusions.may.not.apply..This.

Limited.Warranty.provides.specific.legal.rights.and.you.may.also.have.other.rights.which.vary.from.state.to.state.

Trademarks:

D-Link.is.a.registered.trademark.of.D-Link.Systems,.Inc..Other.trademarks.or.registered.trademarks.are.the.property.of.their.respective.owners.

Copyright Statement:

No.part.of.this.publication.or.documentation.accompanying.this.product.may.be.reproduced.in.any.form.or.by.any.means.or.used.to.make.any.

derivative.such.as.translation,.transformation,.or.adaptation.without.permission.from.D-Link.Corporation/D-Link.Systems,.Inc.,.as.stipulated.by.the.

United.States.Copyright.Act.of.1976.and.any.amendments.thereto..Contents.are.subject.to.change.without.prior.notice.

Summary of Contents for DNS-1100-04












































































































































Search results

Summary of Contents for DNS-1100-04

Reviews:

Related manuals for DNS-1100-04

Brands by name

Popular brands

D-Link DNS-1100-04, Product Manual

Search results

Summary of Contents for DNS-1100-04

Reviews:

Related manuals for DNS-1100-04

Brands by name

Popular brands