D-Link DMS-1100 Series User Manual
37
From: Date of the Month
Select date of the month that daylight saving time will start.
From: Month
Select the month that daylight saving time will start.
From: Year
Select the year that the daylight saving time will start.
From: Time In HH MM
Select the time of the day that daylight saving time will start.
To: Date of the Month
Select the date of the month that daylight saving time will end.
To: Month
Select the month that daylight saving time will end.
To: Year
Select the year that the daylight saving time will end.
To: Time In HH MM
Select the time of the day that daylight time will end.
Offset
Select the number of minutes to add during daylight saving time. The
default value is 60. The range of this offset is 30, 60, 90 and 120.
Table 4.21
Click
Apply
to make the configurations take effect.
System > Time and SNTP > SNTP Settings
The SNTP Settings page allows user to configure the time settings for the Switch.
Figure 4.41 – System > Time and SNTP > SNTP Settings
The fields that can be configured for
SNTP Settings
are described below:
Item
Description
SNTP Global Settings
SNTP State
Select to enable or disable the SNTP state.
Poll Interval (30-99999)
Enter the poll interval. The value is from 30 to 99999 seconds. The
default interval is 720 seconds.
SNTP Server Settings
IPv4 Address
Enter the IPv4 address of the SNTP server which provides the clock
synchronization.
Table 4.22
Click
Apply
to make the configurations take effect.