Connect the DMP-210/220 to the PC
§
Open the battery compartment and insert the battery supplied with
this package. Be sure to match the correct polarity.
§
Press the
Play
button to turn on the DMP-210/220. The
DMP-210/220 must be powered on before connecting to the computer
via the USB port.
§
Connect the type “A”
end of the USB cable to
the USB port on your
computer. (This is the
flatter, rectangular end of
the USB cable)
§
Connect the other end of
the USB connector on
the DMP-210/220. (This
is the smaller, square end
of the USB cable)
§
Windows will detect and
load all necessary drivers
when the DMP-210/220 is
connected to the USB port
for the first time.
Note
: Windows 2000 users may be prompted by a “Digital Signature
Not Found” screen. Click “Yes” on each screen to allow the
installation to continue.
