13
Using the DKVM-16
(Continued)
The Reset Button
Pressing the select and bank button of the master switch simultaneously will
reset the KVM switch. This reset action returns the KVM switch back to the
initial state and will also recheck all of the slave banks which are connected
to the master
DKVM-16
.
If you add a new
DKVM-16
as a slave bank, please use the reset button of
the master
DKVM-16
to assign a new ID to it. The new slave bank will now
appear in the OSD menu. With the reset command, the PC ports of the
DKVM-16
will not be reset. The PC ports can only be reset by powering off
the DKVM-16.
The Keyboard Hot Keys
You can also manage and switch the
DKVM-16
through simple hot key se-
quences. To send commands to the
DKVM-16
, the “SCROLL LOCK” key must
be pressed twice within 2 seconds. You will hear a beep confirming that the
keyboard is now in hot key mode. If you do not press any key in the hot key
mode within 2 seconds, the keyboard will revert back to Operation System con-
trol state.
Hot Key Commands
+
Scroll
Lock
Scroll
Lock
+
=
within 2 seconds
Previous Port
+
Scroll
Lock
Scroll
Lock
+
= Next Port
Note: You can also press the “up arrow” key or “down arrow” key to select the
destination port.
Summary of Contents for DKVM-16 - KVM Switch
Page 30: ...30 ...
