13
the setting.
z
Default Key (Key 1 ~ Key 4):
You can type the key that you want to use from Key#1 to
Key #4, and the key that you type will be the encryption
between the stations that you connected with.
z
Key Length, Key Format and WEP Key:If you select 64bit
in Hex format, you must type 10 values in the following
range (0~F, hexadecimal), or 64bit in ASCII format, you
must type 5 values in thefollowing range (0~9, A~Z and a~z
Alphanumeric). If you select 128bit in Hex format, you must
type 26 values (0~F, hexadecimal), or 128bit in ASCII
format, you must type 13 values in the following range (0~9,
A~Z and a~z Alphanumeric).
Be sure that the 2.4GHz 802.11n MPCI Module and the wireless
station were set in the same key.
Note: After all the settings are completed, click Apply to save
the setting.
WPA-PSK:
WPA-PSK (Wi-Fi Protected Access pre-shared key)
is a simpler version that does not support 802.1x and requires a
separate RADIUS server for mutual authentication.
Enter a Passphrase in the WPA-PSK dialog box. This
passphrase must be the same on each computer that is connected
to the wireless network.
