D-Link DIR-X5460 User Manual Download

Page: 96 / 173

D-Link DIR-X5460 User Manual

Section 3 - Configuration

Upgrade

In the Management menu on the bar at the top of the page, click

Upgrade

. This page will allow you to upgrade the router’s

firmware, either automatically or manually. To manually upgrade the firmware, you must first download the relevant file

from

http://support.dlink.com

Click

Save

at any time to save the changes you have made on this page.

Firmware

Current Firmware

Version

The current firmware's version will be displayed.

Check for New

Firmware

Click this button to prompt the router to automatically check

for a new firmware version. If a newer version is found, it will

prompt you to install it.

Automatic Firmware Upgrade

Automatic Upgrade

If enabled, the router will automatically check for and upgrade

to the newest firmware.

Choose Upgrade Time

Enable this function to set the router to automatically upgrade

its firmware at a set time.

Upgrade Time

Configurable if

Choose Upgrade Time

is enabled. Set the

hour and minute to automatically upgrade by using the drop-

down menus.

Upgrade Firmware

If you wish to upgrade manually, first download the firmware

file you wish to upgrade to. Next, click the

Select File

button

and browse to the file to install the new firmware.

Summary of Contents for DIR-X5460














































































































































































Search results

Summary of Contents for DIR-X5460

Reviews:

Related manuals for DIR-X5460

Brands by name

Popular brands

D-Link DIR-X5460, User Manual

Search results

Summary of Contents for DIR-X5460

Reviews:

Related manuals for DIR-X5460

Brands by name

Popular brands