DIR-815/AC
Quick Installation Guide
In order to connect your device to a wireless ISP (WISP), on the
Device
mode
page, from the
Connection method
list, select the
Wi-Fi
value.
Then from the
Work mode
list select the
WISP Repeater
value. In this
mode you can connect your device to another access point, configure a WAN
connection, set your own settings for the wireless network, configure LAN
ports to connect an STB or VoIP phone, and set your own password for access
to the web-based interface of the device.
In order to connect your device to a wired router for adding a wireless network
to the existing local network, on the
Device mode
page, from the
Connection method
list, select the
Wired connection
value. Then from
the
Work mode
list select the
Access point
value. In this mode you can
change the LAN IP address, set your own settings for the wireless network and
set your own password for access to the web-based interface of the device.
In order to connect your device to a wireless router for extending the range of
the existing wireless network, on the
Device mode
page, from the
Connection method
list, select the
Wi-Fi
value. Then from the
Work
mode
list select the
Repeater
value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings
for the wireless network, and set your own password for access to the web-
based interface of the device.
In order to let wired PCs connected to your device access the network of a
wireless router, on the
Device mode
page, from the
Connection method
list, select the
Wi-Fi
value. Then from the
Work mode
list select the
Client
value. In this mode you can change the LAN IP address, connect your device
to another access point and set your own password for access to the web-based
interface of the device.
When the operation mode is selected, click the
NEXT
button.
20
