71
D-Link DIR-685 User Manual
Section 3 - Configuration
Guest Zone
Tick this checkbox to enable the Guest Zone feature.
Enter a wireless network name (SSID) that is different from your
main wireless network.
Select the type of security or encryption you would like to enable
for the guest zone.
Type the IP Address that the router will use for the Guest Zone
network.
Type the Subnet Mask that the router will use for the Guest Zone
network.
Tick this checkbox to prevent guest clients accessing other guest
clients in the Guest Zone. Ticking this option only allows guest clients
to access the Internet.
Tick this checkbox to allow network connectivity between the
different zones created.
Tick the
Enable DHCP Server
checkbox to configure the built-in
DHCP server to assign IP addresses to computers in the Guest
Zone.
Specify the range of IP addresses that will be assigned to computers
in the Guest Zone in the
DHCP IP Address Range
fields. Type the
last IP octet of the first host in the range in the textbox on the left
and the last IP octet of the last host in the range in the textbox on
the right.
Enable Guest Zone:
Wireless Network
Name:
Security Mode:
Router IP Address:
Default Subnet
Mask:
Enable Guest Zone
Client Isolation:
Enable Routing
Between Zones:
DHCP Server
Settings for Guest
Zone:
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet.
These zones will be separate from your main wireless network.
Summary of Contents for DIR-685 - Xtreme N Storage Router Wireless
Page 1: ......
