112
D-Link DIR-685 User Manual
Section 4 - Security
Configure WPA/WPA2 (EAP)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead. You can configure the DIR-685 to use the 802.1x protocol by enabling the Extensible Authentication
Protocol (EAP). Carry out the following steps to configure EAP on the DIR-685:
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless Setup
on the left side.
2.
Click the
Manual Wireless Connection Setup
button.
3.
Next to
Security Mode
, select
Enable WPA/WPA2 Wireless
Security (enhanced)
.
4.
Next to
Cypher Type
, select
TKIP,
AES
, or
Both.
5.
Next to
PSK / EAP
select
EAP
from the drop-down menu.
6.
Next to
RADIUS Server IP Address
, enter the IP address of your
RADIUS Server.
7.
Enter the port used by your RADIUS Server in the
Port
field.
8.
Enter the Shared Secret used by your RADIUS Server in the
Shared Secret
field.
9.
Click
Save Settings to save your settings.
Summary of Contents for DIR-685 - Xtreme N Storage Router Wireless
Page 1: ......
