76
D-Link DIR-640L User Manual
Section 5 - Maintenance
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Maintenance
Enter a new password for the Administrator Login Name. And
type it again in the next box.
Remote management allows the DIR-640L to be configured
from the Internet by a web browser. A username/password is
still required to access the Web Management interface.
Enter the IP address used to access the DIR-640L.
Enter the port number used to access the DIR-640L is used in
the URL. Example:
http://x.x.x.x:8080
whereas x.x.x.x is the IP
address of the DIR-640L and 8080 is the port used for the Web
Management interface.
Check this checkbox to enable HTTPS remote login to your router
Admin
Password:
Enable Remote
Management:
IP Allowed to
Access:
Remote Admin
Port:
Use HTTPS:
